Start page / Products / CWL Safety System

CWL Safety System

With the CWL Safety System installed on our roof safety products or as an individual dragline system, you can be constantly anchored with personal fall protection while you are on the roof.

The system is tested and approved for simultaneous use by 2 persons in accordance to the harmonized European standard CE EN 516 Class 2.

CWL Safety System, WBM - Wire by Metre 

Wire is sold by the metre and cut locally by the installer or retailer. The wire ends are fixed with our innovative wire lock. Offered in lengths of 20, 50, 100 and 500 m, supplied on a roll.
The WBM system is developed with a softer 133-strand cable.  

CWL Safety System, WEL- Wire Extensible Lengths 

Extensive wire lengths with pre-assembled wire rope terminals that are assembled into optional metres. Extensions are made using an installation spanner. Offered in lengths of 2, 3, 5, 9, 14, 20 and 30 m, as well as a finished corner length of 1+1m. 

 Use our calculator to calculate complete systems, with associated components for your installation! 

Select colour
Clear enamel - hot galv.

CWL Safety System Façade ladder

With the safety rail at the façade ladder, you can move about unencumbered up and down along the ladder and remain constantly anchored with personal fall protection.

Safety rails are installed on the brackets at the side of the roof ladder and are extended further along the entire length. Installation on the right or left side of the ladder, as desired. Connection to roof ladders available.

The runner follows along automatically past the fall arrester when ascending and passes these when descending with the help of a gentle pull of the safety line.

In the event of a fall, the runner locks at the rail. A built-in fall arrester is triggered in order to reduce the strain on the person and the roof. The locking mechanism is not dependent on moving parts that can freeze together.