ICE-GRIP solves problems on the roof that no other product can match.
ICE-GRIP is a revolutionary snow/ice stopper that provides a permanent and cost-effective protection against falling ice and snow on all kinds of roofs (except EPDM-roofs) without being a mechanical attachment.
ICE-GRIP is a supplement to traditional snow fences. A transparent, rubber-like coating and a non-slip granulate is applied to the roof. This makes the ice and snow stay put on the roof and melt away. The coating is UV-resilient and helps to seal the roofing surface.
In spite of ice and slippery water, ICE-GRIP still holds on.
• Eliminates falling snow and ice on all types of roofs • Minimises the formation of icicles • Eliminates the need for other snow stoppers on the roof • Easy to apply with a roller or brush • Transparent and can be applied regardless of roof colour • Can be applied over the entire roof or to vulnerable parts of the roof surface • Uniquely age-resilient and prolongs the life of the roof • UV-resilient • Has a unique adhesive and elastic strength with an elongation of 500%-600% • Is cost-effective against ice and snow, corrosion and leakage • Can be applied at temperatures as low as -17°C • Operational temperature range: -40°C to +82°C • Recommended by sheet metal consultants. •
ICE-GRIP is a revolutionary snow/ice stopper that provides a permanent and effective protection against falling ice and snow on all kinds of roofs without being mechanically attached.
ICE-GRIP is a supplement to roof shovelling and traditional snow fences, but it involves absolutely no mechanical installation. The roof is covered merely with a transparent, rubber-like coating and a non-slip granulate that keeps snow from sliding, which means that the snow and ice remain on the roof and melt away from below.
ICE-GRIP is applied simply with a roller or paintbrush, and while ICE-GRIP is still wet, a special granulate is evenly applied over the coating.
Once ICE-GRIP hardens, it adheres to the roof surface while the protruding non-slip granulate stays in place in the hardened coating, thus allowing the roof to take hold of the snow and ice.
ICE-GRIP is a transparent coating that is UV-resilient and also serves as a sealant. It is designed to be applied over the entire roof or onto vulnerable parts of the roof in order to keep snow and ice from falling, such as skylights, dormers, ventilation shafts, gutter valleys, roof feet, chutes and façade mouldings. As the coating also effectively seals extensions and gaps in the roofing, it is helpful to apply ICE-GRIP to such areas as water passages and angle gutters.
ICE-GRIP adheres to such surfaces as wood, concrete, asphalt, slate, marble, ceramic tiles, glass, fibreglass and plastic. For best results, the underlying surface should be clean and dry during application. (Not for use on EPDM rubber).
ICE-GRIP has a minimum effect on the colour of the roof, but it may leave a reflective and slightly shiny surface.
ICE-GRIP comes ready to apply. 4 kg of covering and 0.5 kg of non-slip granulate suffices for approximately 48 running metres (width 250 mm) or 12 m2 of sheet metal.
ICE-GRIP is a supplement and not a substitute for the necessary snow fence at the roof foot.