Start page / Products / Snow fence - profiled

Snow fence - profiled

The function of a snow fence is to prevent snow from falling uncontrollably from the roof that can injure people and damage property underneath or around your roof, and it serves as an anchor point for personal protection equipment. It also serves as foot support when working near the roof foot or roof break.

Upon the installation of a snow stopper and/or snow fence, it is of the utmost importance to adapt the amount to the actual geographic location, amount of precipitation and the design of the roof. Remember that so-called snow pockets can form. This is where more snow ends up and then an extra snow fence or snow stopper is needed to keep the snow in place.

When there is a risk of overloading the snow fence and the roof, the roof must be shovelled in order to prevent damages to the roof, as well as accidents.

The snow fence satisfies SS 831335.

Select colour

The obvious choice when the professional gets to decide!

The snow fence for profiled sheet metal from CW Lundberg is the most cost effective choice in snow fences. They are the lightest on the market, easy to install and easy to extend to the needed length.

The snow fence is installed with a locking system, at each outer end. The same locking system also fits the 3-tube snow fence.

Bracket for concrete tiles

The product is installed onto brackets that are attached to the roof. Used together with a foot plate or batten bracket.

One solution - several functions

The bracket is used for a number of functions, such as walkways, ridge and roof foot rails, snow fences and guardrails for roof hatches.

European patent

Bracket tiled roof

The product is installed onto brackets that are attached to the roof. The bracket profile is different depending on whether it is to be installed on a roof with clay tiles or concrete tiles.

                Bracket clay tiles                        Bracket concrete tiles

Foot plate, load-bearing roofing underlay

For mounting on tongue-in-groove board underlay with battens. Approved for mounting on tongue-in-groove board of a minimum of 17 mm. Enamelled for prolonged life.

 

Foot plate, load-bearing roofing underlay

For mounting on tongue-in-groove board underlay with battens. Approved for mounting on tongue-in-groove board of a minimum of 17 mm. Enamelled for prolonged life.

Installs quickly

Installs quickly and efficiently since installation is done from above with an impactor.

Easy to warehouse

The foot plate suits both concrete and clay brackets. Along with the bracket, it is adjustable in several positions in order to fit based on the batten dimensions and roofing tile.

 

Accessories

Ice-stop rail tube/ profiled sheet metal
Supplement your snow fence with ice-stops and then you have extra protection from ice falling from the roof. The ice-stop is simply pressed in place with a “click” on to the snow fence.
Gutter valley plate 180 mm
Perfect for when you need a snow and ice fence system in the gutter valley, durability is increased and wear-and-tear decreased.
Flag for snow depth
A flag with a snow depth marking makes it possible to find anchor points under the snow. The flag can be attached directly to the anchor loop or special bolt kit on the brackets to the existing roof safety product.